Fiberglass corrugated bars are used in the construction sector. They can replace conventional steel bars as a fastening element. Their excellent properties make fiberglass corrugation a solid and safe material for this type of application.
Fiberglass corrugated bars are used in the construction sector. They can replace conventional steel bars as a fastening element. Their excellent properties make fiberglass corrugation a solid and safe material for this type of application.
| RÉF | Dimensions/mm | Gr/Mètre |
|---|---|---|
| CRV04-01 | 4 | 25 |
| CRV06-01 | 6 | 60 |
| CRV08-01 | 8 | 90 |
| CRV10-01 | 10 | 150 |
| CRV12-01 | 12 | 220 |
| CRV14-01 | 14 | 290 |
| CRV16-00 | 16 | 380 |
| CRV20-02 | 20 | 560 |
| CRV25-01 | 25 | 940 |
| CRV30-00 | 30 | 1300 |
| CRV32-00 | 32 | 1782 |
| CRV40-00 | 40 | 2324 |
At Polymec, we offer corrugated fiberglass rods for construction applications where technical fiberglass bars with different diameters and weights per metre are required.
We use this product when the project requires a fastening element and we are considering an alternative to conventional steel bars. The current product sheet indicates that corrugated fiberglass rods can replace conventional steel bars as a fastening element and that fiberglass reinforcement is a solid and safe material for this sector.
We offer different corrugated fiberglass rod references with diameters from 4 mm to 40 mm and defined weights per metre, allowing us to guide the selection according to the needs of the project.
A corrugated fiberglass rod is a technical fiberglass bar with a ribbed surface. Within our range of fiberglass profiles, we recommend it when a bar for construction and fastening applications is required.
Unlike other profiles such as smooth rods, tubes, flat bars or angle profiles, corrugated fiberglass rods have a specific geometry that should be reviewed according to the intended use, required dimensions and project conditions.
We use corrugated fiberglass rods in construction-related projects. The current product sheet indicates that these bars can replace conventional steel bars as a fastening element.
We recommend corrugated fiberglass rods when a bar for construction applications is required and an alternative to conventional steel bars is being considered as a fastening element.
We also consider them when the project requires a specific reference based on diameter, weight per metre or compatibility with an already defined design.
When there are specific requirements regarding calculations, regulations, tolerances, length, cutting, exposure or assembly, we review the case before confirming the final reference.
If the corrugated fiberglass rod does not match the geometry required, we also offer other fiberglass profiles that can be considered depending on the application:
Do you need corrugated fiberglass rods for construction or as a fastening element? At Polymec, we review the most suitable reference with you according to diameter, weight per metre and project requirements.
We need to know the application, intended diameter, fastening function, operating environment and any technical or regulatory requirement that may affect the choice of bar.
We compare both options when the project allows for several geometries. We review whether the design requires a ribbed surface or whether a smooth round rod is better suited to the assembly.
We review the bar's function, project requirements, assembly conditions and available technical documentation before confirming that the replacement is suitable.
Weight per metre helps us compare references, assess handling and estimate how each diameter affects the project as a whole.
A technical data sheet should be requested when the project depends on calculations, regulations, tolerances, structural behaviour or specific operating conditions.
