The fiberglass Dog Bone profile can be used in various sectors. It has insulating properties that make it widely used in the electrical industry. In addition, its strength, light weight and durability allow it to be recycled and therefore reused in other installations.
| RÉF | Dimensions/mm | Gr/Mètre |
|---|---|---|
| DBV08-02 | 8 x 6 | 70 |
| DBV10-01 | 10 x 8 | 104 |
| DBV12-01 | 12 x 10 | 200 |
| DBV14-00 | 14 x 10 | 210 |
| DBV16-00 | 16 x 12 | 290 |
| DBV16-02 | 16 x 14 | 300 |
| DBV20-00 | 20 x 16 | 463 |
At Polymec, we offer the fiberglass Dog Bone profile for projects where a special profile with defined dimensions, insulating properties and good technical performance is required.
We use this type of profile in various sectors and consider it particularly suitable for applications related to the electrical industry, where the material's insulating properties are relevant.
The fiberglass Dog Bone profile stands out for its strength, light weight and durability. It can also be recycled and reused in other installations, an aspect that should be reviewed according to the actual conditions of each project.
A fiberglass Dog Bone profile is a technical profile with a special geometry within the range of fiberglass profiles.
We recommend it when the project requires a specific section that is not suited to more common geometries such as rods, tubes, flat bars, angle profiles or U profiles.
As this is a specific profile, we always review the available dimensions, weight per metre and the function it performs within the assembly before recommending a reference.
We use the fiberglass Dog Bone profile in various sectors. The current product sheet highlights its use in the electrical industry due to its insulating properties.
We also consider it for technical applications where a special fiberglass profile with strength, light weight and durability is required.
The fiberglass Dog Bone profile has several characteristics listed in the current product sheet:
These characteristics help us assess this profile in projects where a special, lightweight component suitable for technical applications is required.
We recommend a fiberglass Dog Bone profile when a special geometry, insulating properties and a specific dimensional reference within the range of fiberglass profiles are required.
We also consider it when the project cannot be properly addressed with more standard profiles and requires a specific section to suit the assembly.
When there are requirements regarding insulation, fit, tolerances, exposure, weight or supply, we review the case before confirming the final reference.
If the Dog Bone profile does not match the geometry required, we also offer other fiberglass profiles that can be considered depending on the application:
Do you need a fiberglass Dog Bone profile for an electrical, technical or industrial application? At Polymec, we review the most suitable reference with you according to dimensions, weight per metre and project requirements.
We need to know the application, approximate dimensions, operating environment, the profile's function within the assembly and any requirements related to insulation, fit or weight.
The special geometry determines how the profile fits within the assembly. For this reason, we review whether the design genuinely requires a Dog Bone profile or whether it can be resolved with another fiberglass profile.
We review the operating conditions, type of installation and insulation requirements before recommending a reference or communicating specific performance characteristics.
Weight per metre helps us assess handling, integration of the profile into the assembly and differences between references with similar dimensions.
We request a technical data sheet or drawing when the profile must fit with other components, work to specific tolerances or perform a critical function within the installation.
